When you are trying to create a beautiful landscape that includes sidewalks, flower gardens, and other others, you need to have a material in place that will keep weeds from growing and create a great border. There are two basic types available and those include composite and plastic bender board. One lasts longer than the other but both are great for the job.
The wood fibers do not keep the composite from being flexible. Using the fibers, it is able to match the color of the soil and will break down over time. If you're wanting something that will last a few years, this is your best choice. Though it does break down over time, it takes quite a while to do so.
The plastic one is made from recycled plastics. This helps keep it environmentally sound because new material is not made for this. Instead, it is made in a similar fashion as the composite, but using plastic composite materials that won't break down. This one will last much longer and won't have to be replaced.
Installing both of them requires the same steps. The first being measurements. Put stakes in the ground in various places along the path where the material will be installed. Wrap a string along with the stakes and measure how much string you used. This will tell you how much material you need without having to use an inflexible metal tape measure that will give inaccurate measurements for circle or wandering angles.
Dig the trench and put stakes in to hold the board. The trench needs to be six inches wide and deep enough to cover the material. Leave the dirt nearby to fill in when you're near the last step. Place the stakes at intervals but on the side away from the grass or turf. Two stakes will be needed in places where there will be a break in the material, but the second one can be put in later when you know where the break will be.
Start putting the board into the trench. When you reach an end and need to add a second one, go ahead and place a second stake to be able to hold both ends together. If you need to cut the material for it to fit, now is the time to do so. If an area is riding high and will be above the trench, grab the shovel and dig out a bit more dirt to allow it to settle below the line.
Push the dirt into the hole. The whole reason for keeping the dirt nearby is to make it easy to fill it back in. You'll have more than you need but you want to pack it down. It will settle over time, so don't worry too much if it creates a bit of a mound. Use your feet or a tamping tool to pack it in nice and tight.
This material and these steps will make it easy to create great looking landscaping and prevent pulling weeds every few weeks. The idea of the material is to provide a nice border that will not be full of weeds and have a great break between the turf and the other landscaping.
The wood fibers do not keep the composite from being flexible. Using the fibers, it is able to match the color of the soil and will break down over time. If you're wanting something that will last a few years, this is your best choice. Though it does break down over time, it takes quite a while to do so.
The plastic one is made from recycled plastics. This helps keep it environmentally sound because new material is not made for this. Instead, it is made in a similar fashion as the composite, but using plastic composite materials that won't break down. This one will last much longer and won't have to be replaced.
Installing both of them requires the same steps. The first being measurements. Put stakes in the ground in various places along the path where the material will be installed. Wrap a string along with the stakes and measure how much string you used. This will tell you how much material you need without having to use an inflexible metal tape measure that will give inaccurate measurements for circle or wandering angles.
Dig the trench and put stakes in to hold the board. The trench needs to be six inches wide and deep enough to cover the material. Leave the dirt nearby to fill in when you're near the last step. Place the stakes at intervals but on the side away from the grass or turf. Two stakes will be needed in places where there will be a break in the material, but the second one can be put in later when you know where the break will be.
Start putting the board into the trench. When you reach an end and need to add a second one, go ahead and place a second stake to be able to hold both ends together. If you need to cut the material for it to fit, now is the time to do so. If an area is riding high and will be above the trench, grab the shovel and dig out a bit more dirt to allow it to settle below the line.
Push the dirt into the hole. The whole reason for keeping the dirt nearby is to make it easy to fill it back in. You'll have more than you need but you want to pack it down. It will settle over time, so don't worry too much if it creates a bit of a mound. Use your feet or a tamping tool to pack it in nice and tight.
This material and these steps will make it easy to create great looking landscaping and prevent pulling weeds every few weeks. The idea of the material is to provide a nice border that will not be full of weeds and have a great break between the turf and the other landscaping.
About the Author:
Get great tips for choosing a plastic bender board supplier and more info about a reputable supplier at http://www.bestedging.com right now.
0 comments:
Post a Comment